Hapter, Ystem, Etup – NEXCOM NISE 2000 User Manual
Page 44

Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
31
Chapter 3: System Setup
NISE 2000, NISE 2010, NISE 2020 User Manual
C
HAPTER
3: S
YSTEM
S
ETUP
Removing the Chassis Cover
3. Lift up the cover then remove it from the chassis.
Prior to removing the chassis cover, make sure the unit’s power is
off and disconnected from the power sources to prevent electric
shock or system damage.
1. The screws on the cover are used to secure the cover to the chassis.
2. Remove these screws and put them in a safe place for later use.