Installing a pci expansion card – NEXCOM NISE 2000 User Manual

Page 53

Text mode
Original mode

Chapter 3: System Setup

NISE 2000, NISE 2010, NISE 2020 User Manual

Installing a PCI Expansion Card

2. Lift the bottom cover and remove the rackmount bracket to access the

PCI expansion slot.

NISE 2010 is equipped with 1 PCI expansion slot.
NISE 2020 is equipped with 2 PCI expansion slots.
The illustrations shown in this section used the NISE 2010 system.

PCI expansion

slot

1. With the bottom side of the chassis facing up, remove the screws of

the bottom cover and the screws of the rackmount bracket on one side
of the chassis.

Bottom cover
Rackmount

bracket

This manual is related to the following products:

NISE 2010 NISE 2020