Phoenix contact terminal block for com port – NEXCOM NISE 2000 User Manual
Page 57
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
44
Chapter 3: System Setup
NISE 2000, NISE 2010, NISE 2020 User Manual
Phoenix Contact Terminal Block for COM
Port
1. Unplug the Phoenix Contact Terminal Block.
Phoenix Contact
Terminal Block
2. Insert a flat-bladed screwdriver in-between the dual bridge rail located
in the middle of the terminal block then insert a wire into its corre-
sponding feedthrough.
Screwdriver
Phoenix contact
terminal block
Dual bridge rail
Wire