Entering setup, Bios main menu – NEXCOM NISE 2000 User Manual
Page 59
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
46
NISE 2000, NISE 2010, NISE 2020 User Manual
Chapter 4: BIOS Setup
Entering Setup
When the system is powered on, the BIOS will enter the Power-On Self
Test (POST) routines. These routines perform various diagnostic checks; if
an error is encountered, the error will be reported in one of two different
ways:
If the error occurs before the display device is initialized, a series of
•
beeps will be transmitted.
If the error occurs after the display device is initialized, the screen will
•
display the error message.
Powering on the computer and immediately pressing allows you to
enter Setup. Another way to enter Setup is to power on the computer and
wait for the following message during the POST:
TO ENTER SETUP BEFORE BOOT
PRESS
Press the key to enter Setup:
BIOS Main Menu
Once you enter Award BIOS CMOS Setup Utility, the Main Menu will ap-
pear on screen. The main menu allows you to select from eight setup func-
tions and two exit choices. Use the arrow keys to select among the items
and press