NEXCOM NISE 2000 - Manual (Page 73)

Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 60 NISE 2000, NISE 2010, NISE 2020 User Manual
Chapter 4: BIOS Setup
PnP/PCI Configurations
Init Display First
PCIEx
When the system boots, it will first initialize the PCI Express x16
graphics card.
PCI Slot
When the system boots, it will first initialize PCI.
Reset Configuration Data
Enabled
The BIOS will automatically reset the Extended System Configuration
Data (ESCD) once. It will then recreate a new set of configuration
data.
Disabled
The BIOS will not reset the configuration data.
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically config-
ure all of the boot and Plug and Play compatible devices.
Auto(ESCD)
The system will automatically detect the settings for you.
Manual
Choose the specific IRQ resources in the “IRQ Resources” field.
IRQ Resources
Set each system interrupt to either PCI Device or Reserved.
Phoenix - AwardBIOS CMOS Setup Utility
IRQ Resources
Item Help
Menu Level 
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F7: Optimized Defaults
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
PCI Device
Legacy ISA for devices
compliant with the
original PC AT bus
specification. PCI/ISA
PnP for devices
compliant with the
Plug and Play standard
whether designed for
PCI or ISA bus
architecture.