NEXCOM NISE 2000 User Manual

Page 66

NISE 2000, NISE 2010, NISE 2020 User Manual

Chapter 4: BIOS Setup

Security Option

This field determines when the system will prompt for the password -
everytime the system boots or only when you enter the BIOS setup. Set
the password in the Set Supervisor/User Password submenu.

System
The system will not boot and access to Setup will be denied unless
the correct password is entered at the prompt.

Setup
The system will boot, but access to Setup will be denied unless the
correct password is entered at the prompt.

On-Chip Frame Buffer Size

This field is used to select the onboard VGA’s frame buffer size that is
shared from the system memory.

Boot Display

This field is used to select the type of display to use when the system
boots.

CRT

Select this option if you want the system to boot the CRT display.

CRT+LVDS

Select this option if you want the system to boot both the CRT and
LCD flat panel display.

Panel Number

This field is used to select the type of panel that you are using. The
options are:

800x600 18bit S
1024x768 18bit S

This manual is related to the following products:

NISE 2010 NISE 2020