KBC Networks WES - Manual (Page 16)

WES Mesh Wireless System Operations Manual
MESH PRODUCT SPECIFICATIONS
For product improvement, design and specifications are subject to change without notice.
RF MODULES (CONTINUED)
Receive Sensitivity
802.11a:
-88dB@6Mbps, -87dB@9Mbps, -85@12Mbps,
-83dB@18Mbps, -80dB@24Mbps,-75dB@36Mbps,
-73dB@48Mbps, -71dB@54Mbps
802.11b: -95dB@1Mbps, -94dB@2Mbps, [email protected],
-90dB@11Mbps
802.11g: -90dB@6Mbps, -89dB@9Mbps, -87@12Mbps,
-85dB@18Mbps, -82dB@24Mbps,-79dB@54Mbps
Antenna Connectors: 2x N-Type Female
NETWORK MANAGEMENT
Interface:
Web GUI via https secure
Protocols Used: All TCP/IP
Multicast Support: Yes
Quality of Service: 802.11e (WME), ToS, QoS
SECURITY
Routing, VPN, Encryption Support (802.1x, AES-CCM, TKIP, WEP, WPA, WPA2)
MECHANICAL
Physical Dimensions:
7.125”H x 8.375”W x 2.188”D
Weight: 3.2 lbs
Environmental: NEMA-67, IP65
Enclosure Material: Die-Cast Aluminum
Mounting Hardware: Pole Bracket and U-bolts
POWER
Power Requirements:
7VDC – 20VDC
Power Method: Power-over-Ethernet (PoE) via power injector module (“mid-
span” compliant – pins 4,5 positive – pins 7,8 ground)
Connector: RJ45 – in and out of power injection module
Cable Specifications: 100 Meters (328 Feet) on 24 AWG CAT-5 cable
ENVIRONMENTAL
Operating Temperature: -40C to +80C
Humidity:
95% non-condensing
APPROVALS
FCC ID:
Standard: NKRDCMA82
900: SWX-XR9
IC:
Standard: 4441A-DCMA82
900:
CE:
Standard:
(TBD) 900: (TBD)
23
WES Mesh Wireless System Operations Manual
MESH PRODUCT SPECIFICATIONS
For product improvement, design and specifications are subject to change without notice.
POWER INJECTION MODULE (PIM)
MECHANICAL
Physical: Plastic housing, not weatherproof
Dimensions: 1.0”H x 2.125”W x 1.625”D
Weight: 1.1oz
POWER
Power Requirements: 12 VDC 1A (wall transformer supplied)
Power-over-Ethernet (PoE): PoE “mid-span” compliant
(pins 4,5 positive – pins 7,8 ground)
Connectors: DC Jack 2.5 mm x 5.5 mm
center positive, 2 – RJ45
Warranty
2 YEAR LIMITED WARRANTY (SEE PAGE 26 FOR DETAILS)
24