Junger Audio d06 - Digital Audio Leveler - Manual (Page 38)

5. OPERATION
operation manuad d06, chapter 5 - Operation - page 8 of 12
On the Exceptions page open the “Add Port” menu:
Here you must give this rule a unique name (e.g. “d06 #1.1”) and assign it a
UDP port number from the number of UDP Ports, set up by:
UDP Port Range Start / UDP Port Range End (see METERING).
If you want to connect from different PCs with the same device, it is sufficient
enough to assign one port, because different PCs will open different IP
sockets because they have different IP address (but use the same UDP port
number).
If you want to connect from the same PC with different devices, a unique
UDP port number for every remote device is necessary!
Important Note! To connect multiple browser sessions from the same PC
with the same device is not implemented! In such case the next browser
session will not get UDP data from that device. This will cause a red colored
meter display :