Junger Audio b45 - Digital Audio Delay User Manual
Page 9
2. FUNCTION DESCRIPTION
The digital audio delay b45 is fitted with an serial remote
interface in RS-422 format.
Every device needs a device address to be registered in a
remote system. The address can be selected with the ADDR
switch on the rear panel. 16 addresses are selectable (0..F).
The preselected address is valid with next power-on reset.
Up to 16 delays b45 can be controlled from one remote panel
brc4x.
Device model name and device address are to recognize using
the remote protocol of serial remote interface by an automation
system or by PC. With it various boxes can be combined in one
remote system or remote chain. However a maximum of 16
devices per model can be controlled in one chain.
2.3
REMOTE SYSTEM
operation manual b45, chapter 2 -Function description- page 2-3