Junger Audio b45 - Digital Audio Delay - Manual (Page 10)

2. FUNCTION DESCRIPTION
2.4
LINK FUNCTION /
CHANNEL
CONFIGURATION
The LINK function is used for channel configuration regarding
delay time adjustment. It eables convenient setting of delay time
for a group of audio channels. Following links or channel
configuration are possiblel:
CH1 + CH2 + CH3 + CH4 (all 4 channels linked)
CH1 + CH2 CH3 + CH4 (two linked pairs)
CH1 CH2 CH3 CH4 (all channel independent)
The LINK function is a basic setting and is valid for all presets.
All linked channels are working with the same delay time.
Adjustment of delay time is valid for linked channels at the same
time.
The display is showing delay time for all four presets (not more
for individual channels) if all four channels are linked (P1 ...P4).
2.5
DISPLAY OF DELAY
TIME
The adjusted delay time can be displayed in various time scale
formats. The time scale format is to select in DELAY menu. The
resolution for the adjustment is changing with selection of
specific time scale format. For some formats (f.i. frames)
adjustment is possible in larger steps only.
Time scale format can be different for different presets. Time
scale format will be stored by storing adjustments into the preset.
2.6
VIDEO FORMAT
To get the right delay time (as absolut time value) it is necessary
to set the correct video format (PAL/NTSC). The video format is
to select in setup menu.
If the unit is synchronized to video reference the selection of
video format is done automatically independent of the video
format selection in setup menu.
page 2-4 operation manual b45, chapter 2 -Function description-