Junger Audio b45 - Digital Audio Delay - Manual (Page 26)

5. SETUP
Push
For opening and selection of EDIT menus.
SELECT
for opening and selection of EDIT menus
Main display
Delay / Link
Auto Tracking
Learn Preset Keys
Sync Mode / Time Base
Main display
Time Out
Contrast / Brightness
Version display
EXIT Reset to main display, basic settings
are stored automatically
individual preset adjustments are only to
store by doing „learn preset keys“!
The main display shows either the signal level or the delay time.
The display mode is to select in MAIN DISPLAY menu. The not
displayed item is to call by pushing SELECT button anytime.
The display of delay time is different dependent on selected link
mode.
4 channels independent (4 different delay times possible):
C1: ___ C2: ___
C3: ___ C4: ___
two pairs linked:
link C1 + C2: ___
C = channel
link C3 + C4: ___
P = preset
4 channels linked (one delay time for all four channels):
P1: ___ P2: ___
P3: ___ P4: ___
Note: If all four channels are linked the display shows one
delay time for each preset! Delay times can be changed
by pushing and turning CONTROL knob. Values are
stored automatically!
level meter
delay time
basic settings
valid for all presets
push
5.1
STARTING AND
SELECTION OF
EDIT MENUS
5.2
MAIN DISPLAY
page 5-2 operation manual b45, chapter 5 -Setup-