Junger Audio b45 - Digital Audio Delay User Manual
Page 27

5. SETUP
Signal level display can show input level for all four channels.
Audio level is displayed as bargraph. This display is not scaled.
Two segments are appr. 2dB of audio level. The level display
gives information about the existence and the size of the audio
signals.
I 1: IIIIIII i
2:
IIIIIII
i 3: IIII
i
4:
IIIIIIIIII
After selection of delay time display or setup menu by pushing
SELECT button one can adjust displayed time values or
parameter.
5.3
ADJUSTMENT OF
DELAY TIME AND
SETUP
PARAMETERS
CONTROL
selection of parameter, selected parameter
blinks on display
CONTROL
adjustment of selected parameter
(see also parameter overview)
push
turn
Each time SELECT button is pushed it opens the next setup
menu. After finishing of settings EXIT button switches back to
main display. All basic settings are stored automatically.
Note: After finishing of adjustment of delay times EXIT button
switches back to main display without storage of values. If you
want to store adjusted delay times as preset you have to store
them by „learn preset key“-function (see 6.4).
5.4
STORAGE OF
PRESETS
Link mode (delay link between channels), delay scaling and
delay time value are storable into 4 individual presets.
SELECT
for selection of teach-in preset menu,
„learn preset key“ function
PRESET 1...4
storage of current adjustments
into preset 1...4
push
push
Note: If all four channels are linked display shows one delay
time for each preset! Delay time can be changed by pushing
and turning CONTROL knob. Delay time scaling and values are
stored like a basic setup item automatically without to use teach
in preset function! In four channel link mode you don’t need to
use „learn preset key“ function.
operation manual b45, chapter 5 -Setup- page 5-3