Ivie iFlex 2400 Series - Manual (Page 15)

13
Options in this dialog are: ratio, floor, threshold, release off gain, NOM
enable, and last on.
When all modes have been routed and saved, left-click on the processing
tab to continue.
Processing
The processing page contains a scrollable list of inputs, outputs, modes,
and processing element assignments. For each input or output, there is
a pull down list of all the modes associated to that input or output. For
each mode in the pull down list there is a set of processing elements that
have been assigned to that mode and input/output. This allows for a set of
processing elements for every mode associated to every input or output.
Sonata assigns a default input or output mode to every input and output.
Any edits to the processing elements of the default input mode will be
applied to that mode for all inputs. The same applies for the default output
mode.
To start making processing assignments, select a mode for an input or
output from the pull down menu next to that input or output. When
a mode is selected, any other input or output that also has that mode
association will automatically change to that mode as well. This helps the
programmer to view and make processing assignments to all the inputs
and outputs associated with a given mode.
Processing assignments are made by modifying the set of processing
elements to the far right of the input or output. Each input mode has by