ILUMINARC Ilumiline™ 36 IP - Manual (Page 23)

Technical Information
Ilumiline 36 IP Optic (RGB or VW) User Manual Rev. 6 19
5. Technical Information
Always dry the
external optics
and glass
surfaces carefully
after cleaning them.
If you still
experience
technical
problems after
trying the solutions in the
Troubleshooting Table,
contact ILUMINARC
®
Technical Support.
Product Maintenance
To maintain optimum performance and minimize wear, the user should clean the products
frequently. Usage and environment are contributing factors in determining the cleaning
frequency. As a rule, the user should clean the products at least twice a month. Dust build up
reduces light output performance and can cause overheating. This can lead to reduced light
source life.
To clean a product, follow the below recommendations:
· Unplug the product from power.
· Wait until the product has cooled.
· Clean all external glass optics and glass surfaces with a mild solution of glass cleaner or
isopropyl alcohol, and a soft, lint free cotton cloth or a lens cleaning tissue.
· Apply the solution directly to the cloth or tissue and drag any dirt and grime to the outside
of the lens.
· Gently polish the external glass surfaces until they are free of haze and lint.
Product Repairs
ILUMINARC ® strongly advises you against attempting any repairs to this product unless you
are an authorized ILUMINARC ® technician.
ILUMINARC ® presents the information contained in the Troubleshooting Table as a guide
only. In most cases, opening the product’s housing will invalidate its warranty, unless there is a
written indication on the contrary.