ILUMINARC Ilumiline™ 36 IP - Manual (Page 19)

Operation
Ilumiline 36 IP Optic (RGB or VW) User Manual Rev. 6 15
DIM1 is the
fastest dimmer
curve and DIM4 is
the slowest.
Static Colors
(Ilumiline 36 IP Optic RGB, only)
1. Go to STATIC.
2. Select a color or effect (Red, Green, Blue, or Strobe).
3. Select a color value (000~255) or a strobe frequency (0~20).
(Ilumiline 36 IP Optic VW, only)
1. Go to STATIC.
2. Select a color or effect (Cool or Warm).
3. Select a color value (000~255).
Dimmer
This setting gives the user four different options to simulate the dimming curve of an
incandescent lighting product.
1. Go to DIMMER.
2. Select a dimmer curve (OFF or DIM1~4).
Procedure:
DIMMER Description
OFF Dimmer curve is linear with fader
DIM1 Non-linear (fastest)
DIM2 Non-linear (fast)
DIM3 Non-linear (slow)
DIM4 Non-linear (slowest)
Color
1. Go to SETTINGS > COLOR.
2. Select the color method (OFF, RGB TO W, UC).
Procedure:
OFF
When the RGB faders are all set to “255”, the output is maximum.
RGB TO W
When the RGB faders are all set to “255”, the output is the selected White color (see
Whites Setting).
UC
When the RGB faders are all set to “255”, the output matches the same color output of
previous versions of this product.