ILUMINARC Ilumiline™ 36 IP - Manual (Page 16)

Operation
12 Ilumiline 36 IP Optic (RGB or VW) User Manual Rev. 6
Make sure to
mount this
product away
from any flammable
material as indicated in
the Safety Notes.
Mounting
Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes section.
Orientation
Always mount this product in any safe position making sure there is adequate room for
ventilation, configuration, and maintenance.
Installation
The Ilumiline 36 IP Optic (RGB or VW) comes with two adjustable brackets with
3mm slot openings to mount the product on any firm, non-flammable surface. Once
mounted the angle of the product can also be adjusted and locked into place.
ILUMINARC
® recommends following the general guidelines below when mounting
the Ilumiline 36 IP Optic (RGB or VW).
· When selecting an installation location, consider ease of access to the product for
operation, programming adjustments, and routine maintenance.
· Make sure the product’s mounting location can support its weight. Please see the
Technical Specifications section of this manual for the weight requirement of this
product.
Procedure
The Ilumiline 36 IP Optic (RGB or VW) comes with two adjustable brackets with
3mm slot openings to mount the product on any firm, non-flammable surface. These
feet also serve as floor or wall mount supports. You will have to use two mounting
points per product.