ILUMINARC Ilumiline™ 36 IP - Manual (Page 12)

Operation
8 Ilumiline 36 IP Optic (RGB or VW) User Manual Rev. 6
The signal cable
must match or
exceed the
electrical
characteristics of the
Belden® 9841 cable for
EIA RS-485 applications.
You may also use CAT5,
5e, or CAT6 LAN cable.
Signal Wiring
To provide signal for the Ilumiline 36 IP Optic (RGB or VW), you can connect the bare-
ended IP67 rated signal cable from the product to two IP67 rated signal connectors
(DMX in and DMX Out), or use an IP67 rated junction box. In this case, make sure to
use IP67 rated conduit.
Protocol Connectivity
The Ilumiline 36 IP Optic (RGB or VW) uses USITT DMX 512 Protocol. The
procedure below illustrates the recommended connection method.