Doremi TMS - Manual (Page 98)

7.10 Netmap Editor
The Netmap Editor icon serves the same function as the Servers icon in the TMS Control Panel. For
more information on this function, refer to Section 6.7.3.
7.11 Networking Configuration
The Networking Configuration feature allows the user to set the network parameters. Clicking on the
Networking Configuration icon will open the following window (Figure 122):
Figure 122: Network Configuration
• Double-click the Ethernet port that you want to configure (Figure 123).
Figure 123: IP Configuration
• Make sure that the Activate Device and Allow All Users check boxes are selected and that the
Enable IPv6 check box is not selected.
TMS.OM.000177.DRM Page 98 of 106 Version 1.4
Doremi Labs