Doremi TMS - Manual (Page 24)

5.1.4.1 Adding a Projector Action
Follow the procedure below:
• Click on the Projector category to highlight it.
• Select from the following action items:
◦ Dowser: Open or Close the selected projector dowser.
▪ Click on the Add button to add this action item to the Macro.
▪ The user can configure the dowser settings on the Dowser Settings window (Figure
10).
Figure 10: Dowser Settings Window
▪ Click on the Ok button when finished to apply the action item to the Macro.
▪ Click on the Save button when finished (Figure 9).
◦ Lamp: Power On or Off the selected projector lamp.
▪ Click on the Add button to add this action item to the Macro.
▪ The user can configure the Lamp settings on the Lamp Settings window (Figure 11).
Figure 11: Lamp Settings Window
• Click on the Ok button when finished to apply the action item to the Macro.
◦ Click on the Save button when finished (Figure 9).
TMS.OM.000177.DRM Page 24 of 106 Version 1.4
Doremi Labs