Doremi Asset Manager - Manual (Page 9)

2 Doremi Asset Manager Set Up
2.1 Installation
How to install the DoremiAM application:
You can download the latest version of Doremi Asset Manager from the Doremi website:
www.doremilabs.com.
The downloaded file will be a compressed folder with a title like: “Doremi Asset Manager-
4.4.40_2.0.0-0_5.0.0-0_94_4.70.zip”
Note: For Mac users, the file will be named 4.4.40_2.0.0-0_5.0.0-0_94_4.70.dmg.zip
Note: This is an example, the numbers you will see may vary.
The Installer naming convention is as follows:
• The first part (e.g. 4.4.40 indicates the DoremiAM version number
• The second part (e.g. 2.0.0-0) indicates the Nugget firmware number
• The third part (e.g.5.0.0-0) indicates the Nugget Post firmware number
• The fourth part (e.g. 94) indicates the NUG-SDI(serial digital interface) firmware #
• The fifth part (e.g. 4.70) indicates the V1 firmware number
To install Doremi Asset manager, unzip the file and double-click the installer, then follow the
instructions to complete the instillation.
Note: It is recommended to reboot you computer after installing Doremi Asset Manager.
2.2 Software License
Without a software license Doremi Asset Manager version 5.0.0 and above will be installed in
evaluation mode which will burn a video watermark and have a clip time limitation on all newly
generated media. The full version can be activated using a license file that can be purchased
directly from Doremi Labs.
Figure 2: Doremi AM Watermark
• To purchase a software license contact [email protected] .
_____________________________________________________________________________________
AMR.OM.000163.DRM Page 9 Version 2.2
Doremi Labs Inc.