Doremi Asset Manager User Manual
Page 71

How to Send and test specific Commands (See Figure 71 above):
•
Command Field: If you know the full command, you can just type it here. Do not include
checksum.
•
File name Field: If the command has a file name, you can type the name as it appears
under Clip ID. The program will convert it to “hex” and show the result under “Full
Command.”
•
Timecode: If the command has a timecode, you can type it as HH:MM:SS:FF. The
program will convert it to FF:SS:MM:HH which is the standard Sony 9-pin protocol
representation.
•
Full command: shows the full command that will be sent to the device
•
Reply: Shows the device’s response to the command sent.
•
Click on Send to send the command.
•
Click on Clear to clear an entry box.
_____________________________________________________________________________________
AMR.OM.000163.DRM
Page 71
Version 2.2
Doremi Labs Inc.
- AUD-D2A (13 pages)
- CaptiView (14 pages)
- ShowVault / IMB (27 pages)
- DCP to ShowVault Conversion Procedure (24 pages)
- DCP-2000 (10 pages)
- ShowVault / IMB (23 pages)
- DCP-2000 (11 pages)
- DSV-J2 (35 pages)
- ShowVault / IMB (33 pages)
- ShowVault / IMB (7 pages)
- DCP-2000 (4 pages)
- DCP-2000 (24 pages)
- ShowVault / IMB (276 pages)
- DCP to ShowVault Conversion Procedure (27 pages)
- ShowVault / IMB (16 pages)
- ShowVault / IMB (31 pages)
- ShowVault / IMB (40 pages)
- ShowVault / IMB (13 pages)
- ShowVault / IMB (36 pages)
- ShowVault / IMB (146 pages)
- Asset Manager (15 pages)
- CineAsset (82 pages)
- AccessLink (62 pages)
- DC-POST (101 pages)
- DSV-J2 (30 pages)
- DSV-J2 (68 pages)
- Dimension 3D (49 pages)
- IMS1000 (14 pages)
- IMS1000 (320 pages)
- Fidelio (77 pages)
- LE100 (52 pages)
- Rapid and Rapid-2x (91 pages)
- XDVI-20s (33 pages)
- TMS (106 pages)
- Final Cut Pro (18 pages)
- GENeration3D (40 pages)
- GHX-10 (36 pages)
- HDG-20 (24 pages)
- H2S-30 (40 pages)
- Nugget (58 pages)
- V1UHD-LE (85 pages)
- S2H-30 (39 pages)