Doremi Asset Manager User Manual
Page 75

Figure 77: VUPloader Utility
•
From the File menu of the VUPloader utility select Open.
•
Browse for the appropriate firmware .bin file and press Open.
Note: Make sure to select the appropriate firmware as Doremi AM will install with the current
firmware for all V1 types.
The V1 Frimware naming convention is as follows:
•
C_HD_4.xx.bin for V1-HD units.
•
HD200_4.xx.bin for V1-UHD units.
•
HD_LE_4.xx.bin for V1-UHD/LE units.
•
After the appropriate firmware is loaded, press the connect button.
•
In the pop up window type in your V1's IP address and press Ok.
Figure 78: VUPloader with Firmware Loaded and Connected to V1 Unit
•
Press the “Upgrade” button to start the firmware upgrade process.
•
During the upgrade the unit will do a soft reboot.
•
Once the firmware upgrade is finished you can close the VUPloader utility.
•
Verify in OPTION+MENU (00) that he unit shows the new Firmware version.
_____________________________________________________________________________________
AMR.OM.000163.DRM
Page 75
Version 2.2
Doremi Labs Inc.