Doremi Asset Manager - Manual (Page 73)

Note: Nugget firmware files will start with “nugget” while NUG-SDI firmware files will start with
“fpga.”
• Once you have selected the appropriate firmware, press the Upgrade Now button.
Figure 74: Nugget Firmware Patch Selected
• During the upgrade process, a progress bar window will be displayed on the screen:
Figure 75: Upgrade Progress Bar
When the upgrade is done, a window confirming a successful upgrade should appear as
presented below:
Figure 76: Upgrade Success Message
In case of failure, you will get one of two different messages: For example, for a Nugget
application:
• If the Nugget firmware upgrade fails, you will get a message asking you to recycle
power on the unit then hit OK and wait.
• If the NUG-SDI firmware fails, you will get a message asking you to redo the upgrade.
_____________________________________________________________________________________
AMR.OM.000163.DRM Page 73 Version 2.2
Doremi Labs Inc.