beautypg.com

Precautions – Dan Dugan Sound Design Dugan-MY16 User Manual

Page 4

background image

Precautions

Failure to observe the following warnings may lead to fatality or serious injury from
fire or electric shock.

1.

Before installing the card, you must refer to the owner’s manual of the host device
or to the Yamaha website (“Guidance on the use of Mini-YGDAI cards” page) to
verify that your host device supports this card, and to verify the number of cards
that can be installed in combination with other Yamaha or third-party cards.Ya-
maha website: http://www.yamahaproaudio.com/

2.

If one or more cards in a combination not endorsed by Yamaha are installed in a
Yamaha device, electrical shock, fire, or malfunction may occur. Please note that
the Dugan-MY16 can be used with the following models of Yamaha product that
accept option I/O cards (Yamaha MY series and third-party products):
PM5D/PM5D-RH, DSP5D, M7CL-48ES, M7CL-48, M7CL-32, MTX5-D, LS9-32,
LS9-16, DM2000, DM1000, 02R96, 01V96, DME64N, DME24N, CL1, CL3, CL5.

3.

To use the Dugan-MY16 card in a DM2000 or 02R96, the following system soft-
ware is required: DM2000 Version 1.14 or later. 02R96 Version 1.06 or later. See
the Yamaha Web site for upgrade information.

4.

Do not attempt to disassemble or modify the card. Do not apply excessive force
to board connectors or other board components. Mishandling the board may
lead to shock, fire hazard, or equipment failure.

5.

To eliminate shock hazard, disconnect the power cable from the main unit before
installing this card.

CAUTION: Failure to observe the following precautions may lead to personal injury, or may result in

damage to equipment or other property.

6.

Do not touch the board’s metallic leads (pins) when handling the card. Pins are
sharp and may cause hand cuts.

7.

The card is electrostatic-sensitive. Before handling the card, you should briefly
touch the main unit’s metal casing with your bare hand to drain any static charge
from your body.

CAUTION: Dan Dugan Sound Design assumes no responsibility for data loss, equipment damage, or

injury caused by inappropriate handling or usage.