Online, Master-slave, 48k-96k – Dan Dugan Sound Design Dugan-MY16 User Manual
Page 35: Link-audio, Native-legacy
Dugan-MY16 User Guide
The Dugan Control Panel
35
Online
This indicator lights to show the unit is online.
Master-slave
This indicates whether this unit is set to
NORM (master)
or
SLAVE
mode on the rear panel
switch.
•
A single Dugan-MY16 must be set to master.
•
If multiple Dugans are linked, set only one to master and the others to slave.
•
If external Dugan automatic mixing controllers are linked with one or more Du-
gan-MY16s, one of the Dugan-MY16s must be set to master.
48k-96k
This indicates whether this unit is set to low (44.1 or 48 kHz) or high (88.2 or 96 kHz)
sample rate on the circuit board switch.
Link-audio
This indicates the operating mode selected on the rear panel switch.
Native-legacy
This indicates whether this device is set to native or legacy mode on the circuit board
switch. This allows Yamaha to maintain compatibility with its older mixers.
NOTE:
After all controls have been set, the Dugan Control Panel can be disconnected. The
Dugan-MY16 remembers all settings, even after the power is turned off.