CRU Forensic RTX - Manual (Page 5)

WiebeTech
F o r e n s i c R T X 4 1 0 - 3 Q J U s e r M a n u a l ( A 9 - 4 1 0 - 0 0 0 4 ) R E V 1 . 0 - 5 -
2.3.1 IDE/PATA HDD: 3.5-inch (IDE + SATA models only)
For IDE/PATA drives, pull gently on the handle to slide the tray out. If the tray doesn’t slide out easily, do
not continue to pull on the handle. Check the lock and make sure that the tray is unlocked.
Once the tray is out, remove the tray’s top and bottom coverings with the leverage key. Attach your
IDE/PATA drive to the ribbon cable and to the 4-pin power cable.
Put the drive into the tray and secure it with screws. Set the top and bottom coverings back onto the tray
and put the tray back into the bay of Forensic RTX. Lock the tray—the tray will not power if left in the
unlocked position—and then move on to the next step.
Leverage Key