CRU DataPAK - Manual (Page 5)

Page 5
2. Hard Drive Installation (Skip ahead if you purchased a pre-configured unit.)
1. Remove the four cover screws and slide the carrier cover off the DataPAK carrier to open.
2. Add the shoulder screws with anti-shock grommets to the hard drives.
3. Remove the foam from the drive connectors.
4. Connect the hard drives and secure via bottom mount screws.
5. Install the hard drive in the carrier so the shoulder grommets align with the mounting
slots. Press the drive firmly in place.
6. Slide the cover on the carrier to close and secure it with the four cover screws.
Carefully slide the carriers into the DataPAK enclosure for operation.
Left Fan
Power
FW 800 FW 400 eSATA USB
Right Fan