Datacard Group CP60 User Manual
Page 57
Page 52
7
Press the Enter key to display the subnet mask.
8
Press the Enter key to return to the Status menu. “Gateway Addr” is displayed on
line 2.
9
Press the Enter key to display the gateway address.
10 Press the Enter key to return to the Status menu. “MAC Address” is displayed on
line 2.
11 Press the Enter key. The MAC address, which is set in the factory, is displayed on
line 2.
If the MAC address needs to be changed, contact your Datacard® service provider.
12 Press Enter to return to the Status menu. “Exit” is displayed on line 2.
13 To print cards, press the Enter key repeatedly to return to the “Printer Ready”
display.