Datacard Group CP60 - Manual (Page 47)

Page 42
2 Clean the permanent cleaning rollers (at location 1),
transport area rollers (at locations 2, 3, 4, 5), and duplex
rollers (at location 6) following the same procedure
used for the pick rollers.
— Wait a few minutes to allow the rollers to dry for
best printer operation and print quality.
3 Replace the print ribbon cartridge and replaceable
cleaning roller. Close the printer cover.
4 Replace cards in the input hopper.
5 Print a card to verify the quality of printing.
2
4
3
1
2
4
3
5
6