Peripheral address, Impulse output type, Figure 13 – CIRCUTOR CEM-C30 series User Manual
Page 24
Figure 13: Validation screen�
After a few seconds viewing the screen shown on
, the system returns to the
Impulse
output weight programming main screen.
Minimum value: 99999.
Maximum value: 0.
Short press the
button to access the next programming step.
4�7�2� Impulse output type
The impulse output type is selected on this screen, between:
kWh or KVArh�
Short press the
button to browse the different options.
To validate the data, long press the
button and the validation screen will appear
) indicating that the programming value has been saved.
After a few seconds viewing the screen shown on
, the system returns to the
Impulse
output type programming main screen.
Short press the
button to access the next programming step.
4�7�3� Peripheral address
NB: This is only displayed if there is a
CEM M-RS485
(communications interface for the
CEM
family of units) connected to the unit.
This is the home screen for entering the peripheral address.
Long press the button to view the value to be programmed.
24
CEM-C30
Instruction Manual