CIRCUTOR CEM-C30 series - Manual (Page 19)

4.5.- INSTANTANEOUS VALUE DISPLAY
To open the screens where the instantaneous value are viewed, long press the key on the
display in standby mode.
The home screen is displayed, Figure 10 :
Figure 10: Instantaneous Value main screen�
Long press the button to open the different screens.
Short press the button to browse the different screens (see Table 7 ).
Long press the button to exit the instantaneous values screens.
The standby mode is activated again when no button is pressed for 60 seconds.
Table 7: Instantaneous value screens
Screen Parameters
L1 Voltage
L2 Voltage
L3 Voltage
L1 Current
L2 Current
19 Instruction Manual
CEM-C30