CIRCUTOR CEM-C30 series - Manual (Page 18)

4�4�2� DISPLAY IN READING MODE
The reading mode is activated by a long press on the button.
In reading mode you can:
 View the voltage, current, active power, apparent power and power factor of the
installation.
 View the energies of the partial energy meters.
 Enter the setup menu.
 View the manufacturer information.
The navigation diagram is shown in Figure 9 :
Figure 9: Navigation diagram in reading mode of the CEM-C10�
Note: PC is a short press on the button (< 2 seconds).
PL is a long press (> 2 seconds).
18
CEM-C30
Instruction Manual