CIRCUTOR DHB Series - Manual (Page 36)

36
Bit 13 Not used
Bit 12 Lack of communication with data memory
Bit 11 Wrong settings
Bit 10 Manufacturer’s setting restored
Bit 9 Lack of measured values in data memory
Bit 8 Not used
Bit 7 Output plate was detected
Bit 6 Output plate - error or lack of calibration
Bit 5 Not used
Bit 4 Not used
Bit 3 Wrong configuration of the individual character.
Bit 2 Not used
Bit 1 Not used
Bit 0 Not used
Bit 15 Not used
Bit 14 Not used
Meter status. Describes the current state of the
meter. Successive bits present data of the event.
The bit set on 1 means, that the event took place.
Events can be only deleted.
Bit 13 Not used
Bit 12 Not used
Bit 11 Not used
Bit 10 Not used
Bit 9 Not used
Bit 8 Not used
Bit 7 LED4 - Signalling of alarm No.4
Bit 6 LED3 - Signalling of alarm No.3
Bit 5 LED2 - Signalling of alarm No.2
Bit 4 LED1 - Signalling of alarm No.1
Bit 3 Status of the alarm relay No.4
Bit 2 Status of the alarm relay No.3
Bit 1 Status of the alarm relay No.2
Bit 0 Status of the alarm relay No.1
4049 Status2 w/r