CIRCUTOR DHB Series - Manual (Page 18)

18
Table 2
dISP
Parameter
symbol
Description Range of changes
d_P
Minimal position of the decimal point
when displaying the measured value
- display format. This parameter is not
taken into consideration during the
CoUntH and HoUr modes.
0.0000 – 0
00.000 – 1
000.00 – 2
0000.0 – 3
00000 –
4
CoLdo
Display colour, when the displayed
value is less than CoLLo.
rEd – red
grEEn – green
orAnG -orange
CoLbE
Display colour, when the displayed
value is higher than CoLLo and less
than CoLHi.
CoLuP
Display colour when the displayed value
is higher than CoLHi
CoLLo Lower threshold of colour change -19999..99999
CoLHi Upper threshold of colour change -19999..99999
ovrLo
Lower threshold of the display nar-
rowing. Values below the declared
threshold are signaled on the display by
the symbol.
- - - - -
.
-19999..99999
ovrHi
Upper threshold of display narrowing.
Values above the declared threshold are
signaled on the display by the symbol.
- - - - -
.
-19999..99999
Table 3
Ind
Parameter
symbol
Description Range of changes
IndCp
Number of points of the individual char-
acteristic. For a value less than 2, the
individual characteristic is switched off.
The number of segments is the number
of points decreased of one.
The individual characteristic is not taken
into consideration in the HoUr modes.
1...21
Xn
The point value for which we will expect
Yn (n-point number)
-19999...99999
Yn Expected value for Xn. -19999...99999