CIRCUTOR OPC Server PS/PSS - Manual (Page 8)

PS/PSS OPC Server -8-
If the entered connection details are incorrect, there is no internet connection, or the
specified PowerStudio server is inactive or requires additional authorization, the following
message will be displayed, indicating that it has not been possible to obtain the devices:
Getting devices error message
If the action is completed successfully, the “Power Studio devices” list will be filled
with all the devices available on the indicated PowerStudio server.
In case multiple servers are configured will be displayed as a tree, under the current
server and devices
The application allows individually selection of the variables of each device, to send
by OPC. If you move to the device name and select will move to
OPC all the variables of this device but if you move to the desired variables and click
only the variable selected will be sent by OPC as you can see in
the picture.
Main screen with PowerStudio retrieved devices
Once you reach this point, you already have an initial configuration created and so
the only thing left to do is to set it as the active one and start the OPC server. The best