CIRCUTOR OPC Server PS/PSS - Manual (Page 17)

PS/PSS OPC Server -17-
You can also configure the Server as OPC tunnelling server, in that case is
necessary to configure the port to receive the requests.
Point 3.8 explains in datails how the tunnelling mode works.
3.6.5.- Help menu
Help menu
‘About’: Displays a window containing information about the software.
‘Circutor’s web site’: Opens the Circutor's web page.
3.7.- Main screen
In this section you will find a detailed explanation of all of the configuration options
in the application’s main window. Every time the application is started, these fields are
initialized with the values of the active configuration.
3.7.1.- Connection with PowerStudio
These fields contain the details of the connection with PowerStudio and are located
in the right-hand part of the main screen, just below the OPC logo.
Connection to PowerStudio form
‘Server’: Contains the access address of the PowerStudio server from which the
different devices and variables will be retrieved.
‘Port’: Contains the access port of the PowerStudio server from which the different
devices and variables will be retrieved.
‘Username’: If PowerStudio requires authorization, this field will contain the
username.
‘Password’: If PowerStudio requires authorization, this field will contain the
password corresponding to the PowerStudio user.