CIRCUTOR QNA500 series - Manual (Page 102)

POWER QUALITY ANALYZER QNA500 8IO
QNA500 8IO Instruction manual 102 / 111
P: #np0000WTD0060^J => 60 seconds
R: #npACK ó #npERR
6. SD Read error
P: #np0000RSD^J
R: #np0 => OK
7. Configure File Import
P: #np0000CFI^J
R: #npBUSY repeat the question until #npACK or #npERR is received
8. Configure File Export
P: #np0000CFE^J
R: #npBUSY repeat the question until #npACK or #npERR is received
9. Upgade
P: #np0000UPD^J
R: #npBUSY repeat the question until #npACK or #npERR is received; if ACK is received
=> reset the unit.
10. Read IP
P: #np0000RII^J
R: #np172.016.156.007
11. Write IP
P: #np0000WIP172.016.156.007
R: #npACK ó #npERR
12. Read GateWay
P: #np0000RGW^J
R: #np172.015.150.099
13. Write GateWay
P: #np0000WGW172.015.150.099
R: #npACK ó #npERR
14. Read NetMask
P: #np0000RNM^J
R: #np255.255.240.000
15. Write NetMask
P: #np0000WNM255.255.240.000
R: #npACK ó #npERR
16. Read MAC
P: #np0000RMA^J