CIRCUTOR QNA500 series - Manual (Page 100)

POWER QUALITY ANALYZER QNA500 8IO
QNA500 8IO Instruction manual 100 / 111
Variable Addresses Num. Reg. Function
Read outputs 24550 (5FE6) 1 04
Enable force outputs 24560 (5FF0) 1 04/10
Status Input1 24570 (5FFA) 1 04
Status Input2 24571 (5FFB) 1 04
Status Input3 24572 (5FFC) 1 04
Status Input4 24573 (5FFD) 1 04
Status Input5 24574 (5FFE) 1 04
Status Input6 24575 (5FFF) 1 04
Status Input7 24576 (6000) 1 04
Status Input8 24577 (6001) 1 04
Status Output1 24580 (6004) 1 04/10
Status Output2 24581 (6005) 1 04/10
Status Output3 24582 (6006) 1 04/10
Status Output4 24583 (6007) 1 04/10
Status Output5 24584 (6008) 1 04/10
Status Output6 24585 (6009) 1 04/10
Status Output7 24586 (600A) 1 04/10
Status Output8 24587 (600B) 1 04/10
Enable manually Output1 24590 (600E) 1 04/10
Enable manually Output2 24591 (600F) 1 04/10
Enable manually Output3 24592 (6010) 1 04/10
Enable manually Output4 24593 (6011) 1 04/10
Enable manually Output5 24594 (6012) 1 04/10
Enable manually Output6 24595 (6013) 1 04/10
Enable manually Output7 24596 (6014) 1 04/10
Enable manually Output8 24597 (6015) 1 04/10
11.2.- MODBUS/TCP
This protocol is a variation of the MODBUS/RTU protocol that has been specially designed to work with
TCP/IP networks. The queries from various devices can be optionally accumulated in a battery. This
will allow various devices to send data to the QNA500 8IO analyzer at the same time and the analyzer
will respond to each specific query. The following port must be used when establishing communications
through the Ethernet port: 30003
11.3.- ZMODEM
This international standard protocol can be used to download files and its main feature is based on the
repositioning of any frame. This is quite important in communications via modem, where existing delays
or silences in the lines can lead to communication errors. This standard protocol has been specially
designed for an optimum operation in these situations. The following port must be used when
establishing communications through the Ethernet port: 14001 (telnet zmodem) or 14002 (RAW
zmodem).