Applied Motion SWM24IP-3EE - Manual (Page 3)

Introduction
Thank you for selecting the Applied Motion Products SWM24 Drive+Motor. We hope our dedication to performance,
quality and economy will make your motion control project successful. If there’s anything we can do to improve our prod-
ucts or help you use them better, please call or fax. We’d like to hear from you. Our phone number is (800) 525-1609, or
you can reach us by fax at (831) 761-6544. You can also email [email protected].
Features
• IP65 environmental protection
• Programmable, micro-stepping digital step Drive+Motor in an integrated package
• Operates from a 12 to 70 volt DC power supply
• Operates in velocity or position mode
• Mid-band anti-resonance
• Accepts analog signals, digital signals and streaming serial commands
• Step input signal smoothing
• Communication options: RS-232, Ethernet UDP/TCP, EtherNet/IP
• Encoder feedback
• Delivers up to 340 oz-in holding torque
• -SF & -QF: four optically isolated, 5 to 24 volt digital “flex I/O” points (each can be configured as an input or
an output)
• -S, -Q, -IP: three optically isolated, 5 to 24 volt digital inputs, one optically isolated 30V, 100mA digital out-
put
• Input filtering both hardware and software
• 0 to 5V analog input for speed and position control
List of SWM24 Model Numbers
SWM24SF-3AE
SWM24QF-3AE
SWM24S-3EE
SWM24Q-3EE
SWM24IP-3EE
Notes:
Last digit indicates 1000 line internal encoder. E: encoder is included, N: no encoder
3
SWM24 Hardware Manual
920-0068B
10/31/2013