Datalogic Scanning LASER SCANNER DS4300 - Manual (Page 52)

DATALOGIC DS4300
Technical Features - 5.1
5 TECHNICAL FEATURES
ELECTRICAL FEATURES
Power
Supply voltage 10 to 30 Vdc
Power consumption max. 5.5 W
Serial Interfaces
Main
RS232, RS485 full-duplex, RS485 half-duplex
(20 mA C.L. only with INT-24 accessory )
Auxiliary RS232
Baud rates 1200 to 115200
Inputs External Trigger, IN1, IN2
(optocoupled NPN or PNP)
Voltage max. 30 Vdc
Input current max. 25 mA
Outputs User-defined OUT1 and OUT2
(optocoupled open emitter, open collector)
VCE max. 40 Vdc
Collector current max. 40 mA continuous; 130 mA pulsed
VCE saturation 1V at 10 mA max.
Power dissipation max. 90 mW at 40
°
C (Ambient temp.)
OPTICAL FEATURES
Light source Semiconductor laser diode
Wave length (Note 1) 630 ~ 680 nm
Safety class Class 2 - IEC 825-1; Class II - CDRH
READING FEATURES (Note 2)
Scan rate 800 scans/sec
Aperture angle 60°
Reading distance 50 mm (1.9 in) to 400 mm (15.7 in)
Maximum resolution 0.20 mm (8 mils)
USER INTERFACE
LED indicators Ready, Good Read, External Trigger ,
Data Transmission, Laser Beam Active