Datalogic Scanning LASER SCANNER DS4300 - Manual (Page 18)

DATALOGIC DS4300
Installation - 2.3
2.3 JUNCTION BOX INSTALLATION
The junction box provides a passive connection between your scanner and
the outside world in a fast and practical way. It represents an alternative to
the 25-pin connector models. Figure 2.3 shows the basic layout of DS4300
using the junction box.
DS4300
Scanner
cable
Junction Box
System cables
Figure 2.3 - Scanner using junction box
For junction box connections, the scanner has a cable that terminates in a
24-pin connector that plugs into the junction box. The system cables pass
through 6 glands in the side of the junction box and the individual wires
connect to spring clamp terminal blocks inside which provide access to all
scanner signals.
2.3.1 Junction Box Mounting
The diagram below shows the dimensions of the junction box and its relative
mounting holes.
mm
in
Figure 2.4 - Junction box dimensions