Datalogic Scanning LASER SCANNER DS4300 - Manual (Page 30)

DATALOGIC DS4300
Installation - 2.15
20 mA Current Loop (INT-24 Accessory Only)
When the INT-24 accessory board is installed, the DS4300 is equipped with
a 20 mA active current loop interface.
The following pins of the 25-pin connector are used for the connections:
Pin Name Function
4 CLOUT- current loop output
5 CLIN- current loop input
7 SGND Main signal ground main interface
DS4300/DS4600 USER INTERFACE
MAX. 300 METERS
4 C.L. OUT-
7 SGND Main GND
I = 20 mA
5 C.L. IN-
I = 20 mA
+
+
Figure 2.18 - 20 mA active C.L. connections
For 20 mA passive current loop interface connections, contact your local
Datalogic representative.