Port counter – D-Link DES-1012 User Manual

Page 35

Text mode
Original mode

10/100 Fast Ethernet Switch User’s Guide

Connecting the Switch

port receiving buffer is full. Press 0 to disable flow control and press 1 to

set data rate as 100Mbps.

NOTE: Flow control is only available in half-duplex mode. In full-duplex

mode, flow control is not available. The port status & setting list
indicates only the setting configured for flow control rather than the
status of flow control.

Port Counter

With the Port Counter, you can do the following:

C: Monitor statistics related to the traffic status of each port.

The screen below is the Port 2 counter.

Figure 14, Counters for Port 2

NOTE: Any changes you make to a specific port will clear the
counters of that port and return that port counter to the
default settings.