D-Link DES-1012 - Manual (Page 29)

10/100 Fast Ethernet Switch User’s Guide
Connecting the Switch
19
3. Set your terminal to the following setting:
•
Baud—9600
•
Parity- None
•
Data Bits—8
•
Stop Bit—1
4. Turn on the DES-1012. When you enter the main screen of the terminal,
press the or key once to start communication. If the
connection is successful, the console program Main Menu will appear on
the screen.
Figure 9, The Console Program Main Menu
Navigating the Console Program Screens
To Do This Use This Key. . .
Move to the submenu First character of each option line
Select a specific port Corresponding port: 01 02 03 04 05 06
07 08 09 10 11 12