Hub to switch, 10base-t hub – D-Link DES-1012 User Manual
Page 24
10/100 Fast Ethernet Switch User’s Guide
14
Connecting the Switch
connection, check the PC LAN card, the cable, switch conditions and
connections.
The following are LED indicator possibilities for a PC to Switch connection:
1. The 100M LED indicator comes on for a 100 Mbps and stays off for
10 Mbps.
2. The Link/Act LED indicator illuminates upon hookup.
3. The FDX/Col LED indicator depends upon LAN card capabilities.
Hub to Switch
A hub (10 or 100Base-TX) can be connected to the Switch via a two-pair
Category 3, 4, 5 UTP/STP straight cable. The connection is accomplished
from the hub uplink (MDI-II) port to any of the Switch (MDI-X) ports.
Figure 6, Switch connected to a 10Base-T or 100Base-TX
Hub
10Base-T Hub
For a 10 Base-T hub, the Switch LED indicators should illuminate as follows:
♦
100M LED speed indicator is OFF.
- DES-3624 (162 pages)
- DES-1008PA (2 pages)
- DES-802 (37 pages)
- SECURICAM NETWORK DCS-5300 (143 pages)
- DES-1108 (24 pages)
- DES-3225G (175 pages)
- DES-1105 (24 pages)
- DES-1228 (60 pages)
- DES1226 (42 pages)
- DES-1026G (16 pages)
- DES-1228P (100 pages)
- DES-3226 (179 pages)
- DES-3326 (285 pages)
- DES-1210-28P (1 page)
- DES-1004 (46 pages)
- DES-3018 (260 pages)
- DES-1024D (17 pages)
- DES-1024D (2 pages)
- DES-2212 (86 pages)
- DES-3208 (92 pages)
- DES-1252 (60 pages)
- DES-1008M (50 pages)
- DES-1226G (27 pages)
- DES-810 (38 pages)
- DE-805TP (19 pages)
- DES-3326S (349 pages)
- DES-5200 (144 pages)
- DES-1016D (26 pages)
- DES-3250TG (186 pages)
- DES-1200M (48 pages)
- DE-824TP (15 pages)
- DFE-2600 (147 pages)
- DES-5016 (96 pages)
- 16-Port 10/100/1000Mbps Gigabit Ethernet Switch + 2-Port Mini GBIC Web-Smart Switch DGS-1216T (61 pages)
- DES-3224 (75 pages)
- xStack DXS-3227P- (5 pages)
- DES-3216 (70 pages)
- WIRELESS G DCS-950G (2 pages)
- DES-2218 (86 pages)
- xStack DXS-3350SR (3 pages)
- DES-1008D (24 pages)