Pilz PSSnet SHL 8T MRP - Manual (Page 28)

Ring/Network coupling
28
3.2 Preparing a Ring/Network cou-
pling
PSSnet SHL - Redundancy Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
3.2 Preparing a Ring/Network
coupling
3.2.1 STAND-BY switch
The devices have a STAND-BY switch, with which you can define the role of
the device within a Ring/Network coupling.
Depending on the device, this switch is a DIP switch or a software switch
(Redundancy:Ring/Network Coupling dialog). By setting this switch,
you define whether the device has the main coupling or the redundant cou-
pling within a Ring/Network coupling.
Depending on the device and model, set the STAND-BY switch in accor-
dance with the following table
(see table 6) :
Device type STAND-BY switch type
PSSnet SHL Can be switched between DIP switch and software switch
Table 5: Overview of the STAND-BY switch types