Pilz PSSnet SHL 8T MRP - Manual (Page 23)

Ring Redundancy
PSSnet SHL - Redundancy Configuration
Pilz GmbH & Co. KG, Felix- Wankel Str. 2, 73760 Ostfildern
2.2 Example of MRP-Ring
23
enable Switch to the Privileged EXEC mode.
configure Switch to the Configuration mode.
mrp new-domain default domain Create a new MRP-Ring with the default domain
ID
255,255,255,255,255,255,255,255,255,255,255,
255,255,255,255,255.
MRP domain created:
Domain ID:
255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255
(Default MRP domain)
mrp current-domain
port primary 1/1
Define port 1 in module 1 as ring port 1 (primary).
Primary Port set to 1/1
mrp current-domain
port secondary 1/2
Define port 2 in module 1 as ring port 2 (second-
ary).
Secondary Port set to 1/2
mrp current-domain mode
manager
Define this device as the ring manager.
Mode of Switch set to Manager
mrp current-domain recovery-
delay 200ms
Define 200ms as the value for the “Ring Recov-
ery”.
Recovery delay set to 200ms
mrp current-domain advanced-
mode enable
Activate the “MRP Advanced Mode”.
Advanced Mode (react on link change) set to Enabled
mrp current-domain operation enable
Activate the MRP-Ring.
Operation set to Enabled
exit
Go back one level.
show mrp Show the current parameters of the MRP-Ring
(abbreviated display).
Domain ID:
255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255
(Default MRP domain)
Configuration Settings:
Advanced Mode (react on link change).... Enabled
Manager Priority........................ 32768
Mode of Switch (administrative setting). Manager
Mode of Switch (real operating state)... Manager
Domain Name.............................
Recovery delay.......................... 200ms
Port Number, Primary.................... 1/1, State: Not Connected
Port Number, Secondary.................. 1/2, State: Not Connected
VLAN ID................................. 0 (No VLAN)
Operation............................... Enabled