Delfield SAR1N-S - Manual

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed floor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters affixed to the cabinet interior. Pilasters are
removable without tools for cleaning. Mounted to the interior ceiling,
the interior incandescent light is controlled automatically through
a switch mounted in the hinge assembly to protect against break-
age. Door openings are protected with heavy gauge stainless steel
breaker strips. An air duct shall be mounted to the ceiling assuring
low velocity, even air movement throughout the cabinet interior.
Doors: Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material formed to protrude
beyond the door gasket to protect the gasket from tearing. Each
door has two edge mount, self closing, cam lift style hinges. Doors
can be removed from the cabinet without the use of tools. Metal
door handle shall be recessed into the door for easy grip without
impacting aisle space. Keyed door lock is mounted in the door next
to the handle. Lock engages into a heavy duty strike mounted to the
cabinet face. Door gaskets are magnetic and mount to the door snap-
ping in place and are removable without tools.
Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled
as one piece and can be removed as one piece. Environmentally
friendly R404A refrigerant is used. The system has the capability of
maintaining between 27ºF and 40ºF in heavy use food service opera-
tions. Refrigerant is metered using a highly responsive thermostatic
expansion valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reduces compressor cycling and longer
compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum efficiency. Evaporator condensate
is eliminated using an energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V, 60 Hz single
phase. A 10’ cord and plug is supplied and attached to a junction box
mounted on the exterior top of the cabinet.
Specifications
Standard Features Options &
Accessories
Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior (SA)
Aluminum interior and exterior, stainless front (SM)
Built in door locks with heavy duty strikes
Recessed metal door handle
Pressure relief valve is standard to prevent door
vapor lock
Exterior digital thermometer with high/low tem-
perature alarm
Easy to use electronic control
Easy access “flip up” shroud
Three wire shelves per section - SA/SS standard with
chrome plated shelves and SM standard with epoxy
coated shelves
Tough ABS interior door liners
10’ attached cord and plug
6” adjustable stainless steel legs
Stainless steel breaker strips
High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs low
Energy savings door heater switch
Two year parts & labor warranty
Five year compressor warranty •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
One section Two section
SSR1N-S SSR2N-S Stainless exterior and interior full door
SSR1N-SH SSR2N-SH Stainless exterior and interior half door
SAR1N-S SAR2N-S Stainless exterior and aluminum interior full door
SAR1N-SH SAR2N-SH Stainless exterior and aluminum interior half door
SMR1N-S SMR2N-S Stainless front aluminum exterior and interior full door
SMR1N-SH SMR2N-SH Stainless front aluminum exterior and interior half door
Models
Specification Line®
Self-Contained Solid Door Narrow Reach-In Refrigerator
Sp
ec
ifi
ca
tio
n L
in
e®
: S
olid
D
oo
r N
arr
ow
R
ea
ch
-In
R
efr
ig
era
to
r
Security (prison) package
6” polyurethane casters
Door field rehingability
Stainless steel interior door liner
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SSR2N-SH