Delfield SAR2S-G - Manual

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed floor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters affixed to the cabinet interior. Pilasters
are removable without tools for cleaning. A fluorescent light is
mounted to the interior ceiling of each compartment, the switch is
part of the light assembly. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the
cabinet interior.
Doors: Double paned tempered thermopane glass. Constructed with
a combination of extruded aluminum and PVC. Each door has two
edgemount, self-closing, cam lift style hinges. Doors can be removed
from the cabinet without the use of tools. Door handle is continuous
along vertical dimension of the door. Door gaskets are magnetic and
mount to the door, snapping in place and removable with out tools.
Keyed door lock is mounted to the door. Lock engages into a heavy
duty strike mounted to the cabinet face.
Refrigeration system: All components are mounted to the exterior
of the cabinet ceiling, outside the food zone and are assembled as
one piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. The system has the capability of maintaining
between 33ºF and 40ºF in heavy use food service operations.
Refrigerant is metered using a highly responsive thermostatic
expansion valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reduces compressor cycling and longer
compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and is operating at optimum efficiency. Evaporator condensate
is eliminated using an energy efficient hot gas system.
Electrical: Standard electrical shall be 115V, 60 Hz single phase. A 10’
cord and plug is supplied and attached to a junction box mounted on
the exterior top of the cabinet.
Specifications
Standard Features Options &
Accessories
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Aluminum interior and exterior, stainless front
(SM)
• Built in door locks with heavy duty strikes
• Pressure relief valve is standard to prevent
door vapor lock
• Exterior digital thermometer with high/low
temperature alarm
• Easy to use electronic control
• Easy access “flip up” shroud
• Three wire shelves per section - SA/SS
standard with chrome plated shelves and SM
standard with epoxy coated shelves
• 10’ attached cord and plug on 115V units
• 6” adjustable stainless steel legs
• Stainless steel breaker strips
• High density foamed in place environmentally
friendly, Kyoto Protocol Compliant, Non ODP
(Ozone Depletion Potential), Non GWP (Global
Warming Potential) polyurethane keeps
energy costs low
• Energy savings door heater switch
• Three year parts and labor warranty and an
additional two year compressor parts warranty
One section Two section
SSR1S-G SSR2S-G Stainless exterior and interior glass full door
SSR1S-GH SSR2S-GH Stainless exterior and interior glass half door
SAR1S-G SAR2S-G Stainless exterior and aluminum interior glass full door
SAR1S-GH SAR2S-GH Stainless exterior and aluminum interior glass half door
SMR1S-G SMR2S-G Stainless front aluminum exterior and interior glass full door
SMR1S-GH SMR2S-GH Stainless front aluminum exterior and interior glass half door
Models
Specification Line®
Self-Contained Glass Door Shallow Reach-In Refrigerator
Specification Line®: Glass D
oor Shallo
w R
each-I
n R
efr
igerat
or
• Security (prison) package
• Door field rehingability
• Additional shelves
• Stainless steel back
• Laminate on front, sides and back
• Bottom mount electrical
• Stainless steel banking strip
• Heat shield end
• Stainless steel kick plate
• Laminate kick plate
• 4” stainless steel utility base
• 230-50-1 electrical*
• 220-60-1 electrical*
* This option will alter the electrical
specifications
SSR1S-G