Volvo 2013 XC70 - Manual (Page 172)

04 Driver support
Driver Alert System*
04
170 * Option/accessory, for more information, see Introduction.
Settings
Settings for Lane Departure Warning can be
made in the menu system by pressing My
Car. Go to
Settings Car settings Driver
support systems Lane Departure
Warning .
There are two alternatives:
On at start-up : This selection switches LDW
on each time the engine is started. Otherwise,
the system will be in the mode that it was in
when the engine was switched off.
Increased sensitivity : This selection increa-
ses the function’s sensitivity. Warnings will be
given at an earlier stage and fewer limitations
apply. When this setting is being used, the sys-
tem only needs to monitor lane marker lines on
one side of the vehicle to change status to
Lane Depart Warn Available .
Symbols and messages in the display
Symbol Message Description
Lane departure warning ON / Lane
departure warning OFF
The function is switched on or off. The text disappears after 5 seconds.
- Lane Depart Warn Available The function is monitoring the road’s marker lines.
- Lane Depart Warn Standby <40
mph
( Lane Depart Warn Standby
<65 km/h )
The function has gone into standby mode because the vehicle's speed is below 40 mph
(65 km/h).
- Lane Depart Warn Unavailable The road lacks clear marker lines.